Updated Nov 17, 2026· 8 min read

Key takeaways

  • GPU near 95 to 100 percent: the graphics card is the limit. Lower resolution, enable upscaling and cut heavy graphics options.
  • GPU well below that while one or two CPU cores sit near 100 percent: the CPU or the game engine is the limit. Lowering resolution will barely help; reduce crowd density, view distance and simulation-heavy options instead.
  • Both low: look for a frame cap, V-Sync, power limits, thermal throttling or a driver problem.

The fastest way to raise FPS in almost any game is to find out whether the GPU or the CPU is the limit, then turn on upscaling (DLSS, FSR or XeSS), lower the few settings that cost the most, and make sure drivers, power mode and background apps are not getting in the way. Those steps work in nearly every title because they target how a game uses your hardware rather than any single game.

Short Answer: The Order That Usually Pays Off

  1. Update the graphics driver and the game itself.
  2. Switch on upscaling in the game’s graphics menu.
  3. Drop shadows, ambient occlusion, volumetric effects and ray tracing before anything else.
  4. Close overlays, launchers and browser tabs that compete for CPU time and memory.
  5. Set Windows to a performance-oriented power mode and confirm memory runs at its rated speed.
  6. Only then consider hardware changes.

Guides from several PC hardware sites list roughly this same order, and they stress that the size of each gain depends on the game and the machine. Treat any percentage you see quoted in a tip list as a rough range, not a promise.

Step 1: Work Out What Is Holding Your FPS Back

Before changing settings, open a monitoring overlay such as MSI Afterburner with RivaTuner, or the performance overlay built into the NVIDIA app or AMD software. Play for a few minutes in a demanding scene and watch GPU usage, CPU usage and per-core load.

  • GPU near 95 to 100 percent: the graphics card is the limit. Lower resolution, enable upscaling and cut heavy graphics options.
  • GPU well below that while one or two CPU cores sit near 100 percent: the CPU or the game engine is the limit. Lowering resolution will barely help; reduce crowd density, view distance and simulation-heavy options instead.
  • Both low: look for a frame cap, V-Sync, power limits, thermal throttling or a driver problem.

A simple confirmation test used by many reviewers is to drop the resolution temporarily. If FPS jumps, you were GPU-limited; if it barely changes, the CPU is the ceiling.

Step 2: Update Drivers and the Game

New releases often ship with a matching driver that carries game-specific optimizations, which is why both NVIDIA and AMD publish Game Ready or Adrenalin releases around major launches. Install the latest stable driver from the maker’s own site or app. If a new driver introduces stutter or crashes, the makers’ support pages describe how to roll back to a previous version. Some guides also suggest a clean install through a driver-removal utility when problems persist after an update. Keep the game patched too, because developers regularly fix performance problems after launch.

Step 3: Use Upscaling and Frame Generation Properly

Upscaling renders the game at a lower internal resolution and reconstructs a sharper image. It is widely described by reviewers as the largest free gain on modern hardware.

Technology Works on What it does Watch out for
DLSS Super Resolution GeForce RTX cards AI upscaling at a lower internal resolution Needs game support; quality modes trade speed for sharpness
DLSS Frame Generation RTX 40 and newer (Multi Frame Generation on RTX 50) Inserts generated frames between rendered ones Adds latency; works best from a base frame rate already near 60
FSR Wide range of GPUs, including older and non-AMD cards Upscaling from AMD, with newer versions using machine learning on supported hardware Image quality differs by version and game
XeSS Intel Arc and other GPUs Upscaling from Intel Best path is on Intel hardware

Start with a Quality preset, which keeps the internal resolution closest to native. Move to Balanced or Performance only if you still need more frames. Frame generation raises the displayed frame rate but does not reduce input delay, so it suits single-player games more than competitive shooters.

For older games without upscaling menus, the NVIDIA app offers driver-level overrides for some titles, and AMD’s software includes its own driver-based options. Support varies by game, so read the notes in each app.

Step 4: Lower the Settings That Cost the Most

Not every graphics option is equal. Reviewers who publish optimized-settings guides repeatedly flag the same heavy hitters, while textures mostly depend on video memory rather than raw speed.

Setting Performance cost Visual loss when lowered
Ray tracing and path tracing Very high Noticeable in reflections and lighting, but often subtle in motion
Shadows High Small going from Ultra to High
Ambient occlusion and global illumination High Small to moderate
Volumetric fog and clouds High Small
Anti-aliasing (native, heavy modes) Moderate to high Replace with upscaling-based AA
View distance and crowd density Moderate; mostly CPU Small unless you play open-world games
Texture quality Low if VRAM allows Large; lower only if memory is full

A practical method is to change one option at a time and look at the frame-time graph rather than only the average. A game that has a decent average but spikes is often running out of video memory or hitting a CPU-heavy scene.

Step 5: Clean Up the System

  • Close overlays and launchers: chat overlays, RGB control programs, cloud sync tools and many browser tabs take memory and CPU time.
  • Trim startup items: Task Manager lets you disable programs that launch with Windows.
  • Windows Game Mode: Microsoft includes a Game Mode setting in Windows settings; leave it on unless a specific game misbehaves.
  • Background recording: turning off background capture in the Windows gaming settings frees resources on weaker machines.
  • Power mode: choose a balanced or best-performance mode and, on laptops, plug in the charger. Many laptops cut performance on battery.
  • Storage: games installed on a solid-state drive load faster and stream assets with fewer hitches than on a hard drive, although this changes loading and stutter more than average FPS.

Step 6: Memory, BIOS and Cooling

If the system memory runs at the default base speed, the rated profile (XMP on Intel boards, EXPO on many AMD boards) may be switched off. Enabling it is a BIOS setting; menu names differ between motherboard makers, so follow your board’s manual. Changing BIOS settings can cause instability and, depending on the maker, may affect warranty terms, so keep to the memory’s rated profile and do not push beyond it.

Heat matters too. A GPU or CPU that reaches its temperature limit lowers its own clock speed. Clean dust from filters and heatsinks with the PC powered off and unplugged, and make sure case fans move air through the system. Laptops benefit from a hard, flat surface or a stand.

Also make sure the monitor is plugged into the graphics card, not the motherboard video port. It is a common mistake in new builds and it leaves the dedicated GPU idle.

Quick Decision Table: What to Do for Your Symptom

Symptom Likely cause First fix
Low FPS everywhere, GPU at maximum GPU-limited Upscaling, lower shadows, ray tracing and resolution
Low FPS, GPU under-used, one core pegged CPU-limited Lower crowd and view distance; close background apps; check memory profile
Good average but stutters Video memory full or shader compilation Lower texture quality; let shaders finish compiling; move game to an SSD
FPS drops after a few minutes Thermal throttling or laptop power limit Clean cooling; plug in; use a performance power mode
FPS capped at 60 or 30 V-Sync or frame limiter Check in-game and driver frame caps against your monitor’s refresh rate
Laptop much slower than expected Game running on integrated graphics Set the game to use the high-performance GPU in Windows graphics settings

Common Mistakes

  • Trusting “FPS booster” software: programs that promise large gains by cleaning or tweaking the registry are not part of the maker-supported route. Stick with drivers, in-game settings and documented Windows options.
  • Turning on frame generation at a low base frame rate: generated frames from a choppy start feel sluggish. Aim for a stable base first.
  • Overclocking before diagnosing: a mild overclock rarely fixes a bottleneck and can add instability. Overclocking can void warranties.
  • Lowering everything to Low: most of the gain comes from a handful of options, so you can keep image quality high by changing only the expensive ones.
  • Ignoring the monitor: a 60 Hz display cannot show more than 60 frames per second, so uncapped FPS beyond that mainly increases heat and noise.
  • Ignoring VRAM: raising textures beyond what the card’s memory holds can cause severe stutter even on a fast GPU.

When Settings Are Not Enough

If the game still falls short after the steps above, hardware is the remaining lever. A GPU-bound system gains most from a newer graphics card; a CPU-bound one gains from a faster processor and quicker memory. Check that the motherboard, power supply and case can take the part before buying, and read the maker’s published requirements. For a graphics card, the maker lists a recommended power supply rating, and many cards need specific power connectors.

Frequently Asked Questions

What is the single biggest FPS boost for most games?

Turning on upscaling, such as DLSS, FSR or XeSS, is usually the largest free gain when a game supports it. Choose the Quality preset first to keep the image sharp. Gains vary by game and hardware.

Does updating my graphics driver really help?

It can, especially for newly released games, because makers ship optimizations and bug fixes with their drivers. The effect is usually modest for older titles. If a new driver causes problems, you can roll back to the previous one.

Will lowering resolution increase FPS in a CPU-limited game?

Usually not by much. Resolution mainly loads the graphics card, so a CPU-limited game stays near the same frame rate. Reduce CPU-heavy options such as crowd density and view distance instead.

Is frame generation the same as a real FPS increase?

It raises the number of frames displayed, which makes motion look smoother, but the game’s response to your input is still tied to the rendered frames. It works best when the base frame rate is already reasonable and is less suited to fast competitive play.

Can I improve FPS on a laptop?

Yes. Plug in the charger, choose a performance power mode, keep vents clear and make sure the game runs on the dedicated GPU. Laptops often reduce power on battery, which lowers FPS noticeably.

Should I buy new hardware or tweak settings first?

Settings and drivers cost nothing and are worth trying first. Hardware upgrades make sense when monitoring shows the GPU or CPU is fully loaded even after sensible settings changes.

R
Ryan Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

What is the single biggest FPS boost for most games?
Turning on upscaling, such as DLSS, FSR or XeSS, is usually the largest free gain when a game supports it. Choose the Quality preset first to keep the image sharp. Gains vary by game and hardware.
Does updating my graphics driver really help?
It can, especially for newly released games, because makers ship optimizations and bug fixes with their drivers. The effect is usually modest for older titles. If a new driver causes problems, you can roll back to the previous one.
Will lowering resolution increase FPS in a CPU-limited game?
Usually not by much. Resolution mainly loads the graphics card, so a CPU-limited game stays near the same frame rate. Reduce CPU-heavy options such as crowd density and view distance instead.
Is frame generation the same as a real FPS increase?
It raises the number of frames displayed, which makes motion look smoother, but the game’s response to your input is still tied to the rendered frames. It works best when the base frame rate is already reasonable and is less suited to fast competitive play.
Can I improve FPS on a laptop?
Yes. Plug in the charger, choose a performance power mode, keep vents clear and make sure the game runs on the dedicated GPU. Laptops often reduce power on battery, which lowers FPS noticeably.
Should I buy new hardware or tweak settings first?
Settings and drivers cost nothing and are worth trying first. Hardware upgrades make sense when monitoring shows the GPU or CPU is fully loaded even after sensible settings changes.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.