Updated Nov 16, 2026· 6 min read

Key takeaways

  • Adjusting settings on the wrong display in a multi-monitor setup.
  • Using the motherboard output while a graphics card sits in the PC.
  • Assuming a long HDMI cable is the same as a short one. Length and quality both affect the signal.
  • Forcing custom modes in utilities beyond what the monitor lists. That can cause a blank screen, and some changes may affect the warranty. Keep to the maker’s supported modes.
  • Skipping the monitor menu. A setting there can limit the mode even with perfect cables.

When a monitor’s higher refresh rate options are missing in Windows, the fastest fixes are to use a cable and port that support the rate (DisplayPort or a high-speed HDMI cable on the right port), select the correct display in Advanced display settings, and update the graphics driver. The cause is almost always the signal path or a setting, not a dead monitor, and you can work through it in a fixed order.

Why the option disappears

Windows only offers refresh rates that the monitor reports and the connection can carry at the chosen resolution. If the monitor, cable, port or driver cannot negotiate a mode, it simply does not appear in the list. Microsoft’s support guidance says to open Settings, System, Display, Advanced display and pick the refresh rate for the selected display, and it notes that driver updates through Windows Update can fix resolution surprises. Any step below that does not match your menus is likely named differently by your maker, so the monitor or motherboard manual is the reference.

Symptom, cause and fix

Symptom Common cause Fix
Only 60 Hz listed Old or low-grade HDMI cable, or a port limited to lower modes Switch to DisplayPort or a certified high-speed cable; try another port
High rate appears at low resolution only Bandwidth limit of cable or port Use a newer cable standard; check the monitor spec for the port that supports the full mode
Option missing after driver update Driver glitch or generic display driver Reinstall the GPU driver from the maker
Wrong monitor selected Multiple displays, settings applied to the other screen Pick the correct display in Display settings
Monitor in a power-saving or limited mode OSD setting, such as an HDMI mode or overdrive profile Open the monitor’s on-screen menu and enable the high-refresh or enhanced mode if the manual lists one
Laptop shows only 60 Hz Battery saver, dynamic refresh or the screen being routed through the integrated GPU Plug in power, check the laptop maker’s display and graphics utility

Step-by-step fix order

  1. Power cycle the setup. Turn off the PC and monitor, unplug the display cable, wait a short while, reconnect and restart. Handle only external cables; do not open the PC or monitor casing.
  2. Confirm the display. In Settings, System, Display, select the monitor you want, then open Advanced display and read the “Choose a refresh rate” list.
  3. Use the right port on the graphics card. If the PC has a graphics card, plug into its outputs, not the motherboard video ports. Mixed up connections are a common reason a high-end card sits idle while a monitor runs on integrated graphics.
  4. Swap the cable. DisplayPort is widely used for high-refresh PC gaming. For HDMI, use a high-speed or ultra-high-speed cable that matches the maker’s stated HDMI version for the monitor. Cheap or old cables are a frequent culprit.
  5. Open the monitor’s on-screen menu. Some models need a setting enabled for the full HDMI or DisplayPort mode. Menu names vary, so follow the monitor manual.
  6. Update the graphics driver. Download the latest from the GPU maker, or use Windows Update as Microsoft suggests. If the issue began after an update, a clean reinstall of the driver can help.
  7. Install the monitor driver or profile if the maker supplies one. Some monitors ship an INF file that unlocks all listed modes.
  8. Test at native resolution. Set the recommended resolution first, then re-open the refresh list. Higher refresh rates may only be offered at the native mode.
  9. Try a second PC or a second cable to separate monitor faults from PC faults.

Cable and port: the likeliest culprit

Bandwidth is the core issue. A given refresh rate at a given resolution needs a minimum data rate, and each cable and port version has a limit. Monitor makers list which input supports which maximum mode, often noting that the top refresh rate works only on DisplayPort or only on a particular HDMI port. If your monitor offers two HDMI ports and one DisplayPort, read the spec table to see which supports the headline number.

Connection What to expect
DisplayPort Common choice for the full high-refresh mode on PC monitors
HDMI (newer versions) Can carry high refresh at common resolutions, depending on the version and the monitor’s port
HDMI (older versions) May limit high resolution to a lower refresh rate
USB-C with DisplayPort Alt Mode Depends on the laptop port and cable; read both makers’ specs
Adapters and docks Often reduce the maximum mode; test by connecting directly

When it is the display or hardware

If the monitor offers high refresh rates on another PC but not yours, suspect the graphics card output, the driver or the cable. If it fails everywhere with different cables, contact the monitor maker’s support. Do not open the monitor or the PC power supply; leave internal repair to a qualified technician or the warranty service.

Common mistakes

  • Adjusting settings on the wrong display in a multi-monitor setup.
  • Using the motherboard output while a graphics card sits in the PC.
  • Assuming a long HDMI cable is the same as a short one. Length and quality both affect the signal.
  • Forcing custom modes in utilities beyond what the monitor lists. That can cause a blank screen, and some changes may affect the warranty. Keep to the maker’s supported modes.
  • Skipping the monitor menu. A setting there can limit the mode even with perfect cables.

Safety and warranty notes

Everything above can be done with the PC switched off or through software menus. Power down and unplug before swapping cables on the back of the PC, and leave the inside of the case, the power supply and the monitor housing alone. Custom resolution tools and overclocked refresh rates can cause instability and may affect warranty coverage, so keep to the modes the maker lists. If the display stays blank after a change, restart in safe mode or wait for the automatic revert, then return to a listed mode.

Frequently Asked Questions

Why does my 144 Hz monitor only show 60 Hz?

The most common reasons are a cable or port that cannot carry the full mode, Windows left at a default setting, or the monitor connected to the motherboard output. Switch to DisplayPort or the correct HDMI port, then choose the higher rate in Advanced display settings.

Can a driver update bring the option back?

Yes, it can fix cases where a generic driver or a failed update hides modes. Microsoft suggests Windows Update for graphics drivers, and a fresh install from the GPU maker is another route.

Does the option vanish because of HDR or scaling?

It can on some setups, because certain modes combine resolution, color depth and refresh in ways the link cannot carry. Try turning HDR off or lowering color depth in the GPU control panel to see whether the higher rate returns.

Is my monitor broken if the higher refresh is gone?

Not necessarily. Try another cable and port and test on another computer first. If it still fails, contact the maker’s support, and do not open the monitor.

Why is refresh rate limited on my laptop?

Laptops may lower refresh rate to save battery or route graphics through a mode that limits it. Plug in power, review the maker’s graphics or display utility and consult the laptop manual for the correct settings.

R
Ryan Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Why does my 144 Hz monitor only show 60 Hz?
The most common reasons are a cable or port that cannot carry the full mode, Windows left at a default setting, or the monitor connected to the motherboard output. Switch to DisplayPort or the correct HDMI port, then choose the higher rate in Advanced display settings.
Can a driver update bring the option back?
Yes, it can fix cases where a generic driver or a failed update hides modes. Microsoft suggests Windows Update for graphics drivers, and a fresh install from the GPU maker is another route.
Does the option vanish because of HDR or scaling?
It can on some setups, because certain modes combine resolution, color depth and refresh in ways the link cannot carry. Try turning HDR off or lowering color depth in the GPU control panel to see whether the higher rate returns.
Is my monitor broken if the higher refresh is gone?
Not necessarily. Try another cable and port and test on another computer first. If it still fails, contact the maker’s support, and do not open the monitor.
Why is refresh rate limited on my laptop?
Laptops may lower refresh rate to save battery or route graphics through a mode that limits it. Plug in power, review the maker’s graphics or display utility and consult the laptop manual for the correct settings.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.