Updated Nov 16, 2026· 7 min read

Our Top Picks

  1. Fitpolo Smart Watches for Men/Women1.850.1 pounds
    Check on Amazon
  2. PODOEIL Military Smart Watches for MenLarge0.2 pounds
    Check on Amazon
  3. Fitpolo Smart Watches for Women1.850.1 pounds
    Check on Amazon

To set your monitor’s refresh rate in Windows 11, open Settings, go to System, then Display, then Advanced display, and pick the highest rate listed for your monitor under Choose a refresh rate; if the top rate is missing, the usual causes are the wrong cable, the wrong port, or a monitor that has its high-refresh mode switched off in its own on-screen menu.

Short answer by situation

Situation Where to change it Note
Windows 11 Settings, System, Display, Advanced display, Choose a refresh rate Select the correct monitor first if you have more than one
Windows 10 Settings, System, Display, Advanced display settings, Display adapter properties, Monitor tab The menu layout differs slightly between builds
NVIDIA card NVIDIA Control Panel, Display, Change resolution Pick the rate in the Refresh rate drop-down
AMD card AMD Software: Adrenalin Edition, Display section Custom resolution tools exist but change them with care
Inside a game Video or Display settings of the game Exclusive fullscreen often shows its own list of rates
Monitor menu On-screen display buttons Some monitors need an overdrive, overclock or high-refresh option enabled

Step-by-step in Windows 11

  1. Right-click an empty part of the desktop and choose Display settings, or open Settings and select System, then Display.
  2. If more than one monitor is connected, click the numbered rectangle for the one you want to change. Use Identify to see which is which.
  3. Scroll down and open Advanced display.
  4. Find Choose a refresh rate. Open the drop-down and select the highest value shown that suits your games.
  5. Click Keep changes when Windows asks. If the screen goes blank, wait about fifteen seconds and it reverts by itself.

Windows also offers a Dynamic refresh rate option on some laptop panels. It lets the system switch between a lower and a higher rate to save power. For gaming on a desktop monitor, a fixed high rate is simpler.

Fitpolo Smart Watches for Men/Women (2 Bands), 1.85" HD Smartwatch for Android iPhone Samsung, Bluetooth Calls, Heart Rate SpO2 Sleep Monitor, 120+ Sport Modes, IP68 Waterproof, 7-Day Battery

Fitpolo Smart Watches for Men/Women (2 Bands), 1.85" HD Smartwatch for Android iPhone Samsung, Bluetooth Calls, Heart Rate SpO2 Sleep Monitor, 120+ Sport Modes, IP68 Waterproof, 7-Day Battery

Chosen because it specifies 1.85" HD Smartwatch for Android iPhone Samsung and Bluetooth Calls.

View on Amazon

PODOEIL Military Smart Watches for Men,1000mAh/1.7" HD Large Screen Smartwatch, Led Flashlight, Answer/Make Calls,Waterproof,Heart Rate/Sleep Monitor/110+ Sport Modes Fitness Watch for Android/iPhone

PODOEIL Military Smart Watches for Men,1000mAh/1.7" HD Large Screen Smartwatch, Led Flashlight, Answer/Make Calls,Waterproof,Heart Rate/Sleep Monitor/110+ Sport Modes Fitness Watch for Android/iPhone

Chosen because it specifies 1000mAh/1.7" HD Large Screen Smartwatch and Led Flashlight.

View on Amazon

Fitpolo Smart Watches for Women (2 Bands), 1.85" HD Smartwatch for Android iPhone with Bluetooth Calls, Heart Rate SpO2 Sleep Monitor, 120+ Sports Modes, IP68 Waterproof, 7-Day Battery & More

Fitpolo Smart Watches for Women (2 Bands), 1.85" HD Smartwatch for Android iPhone with Bluetooth Calls, Heart Rate SpO2 Sleep Monitor, 120+ Sports Modes, IP68 Waterproof, 7-Day Battery & More

Chosen because it specifies 1.85" HD Smartwatch for Android iPhone with Bluetooth Calls and Heart Rate SpO2 Sleep Monitor.

View on Amazon

Change it with the graphics driver

NVIDIA

Open the NVIDIA Control Panel from the desktop context menu or Start menu, expand Display, and click Change resolution. Select your monitor, and under the Refresh rate drop-down pick the desired value. Apply, then confirm. The newer NVIDIA app handles many settings as well, but the resolution and refresh page remains in the classic control panel for many users.

AMD

Open AMD Software: Adrenalin Edition, go to Settings and the Display tab, and look for the monitor entry with its resolution and refresh options. Menu wording changes between releases, so look at your driver’s version of the page. Custom resolution features can push a monitor outside its listed range; use only the values the monitor maker documents.

Why the highest rate is missing

Symptom Common cause Fix
Only 60 Hz listed Plugged into the motherboard video output instead of the graphics card Move the cable to a port on the graphics card, then restart
Only 60 Hz listed Old HDMI cable or an older HDMI port on the monitor Use DisplayPort, or a cable and port that the maker lists for your resolution and rate
High rates listed at lower resolution only Bandwidth limit of the cable or port Check the monitor manual for the supported combinations
Rate resets after a restart Driver or monitor setting conflict Update the graphics driver and set the rate in the driver panel as well
No option at all Generic monitor driver or missing graphics driver Install the current graphics driver from NVIDIA, AMD or Intel
Game runs at 60 Hz Game set to windowed or capped in its options Check display mode and any frame-rate limit setting

Cables and ports matter

A monitor’s maximum refresh rate is only reachable when the connection can carry the data. The maker’s specification sheet and manual list which input supports which combination of resolution and refresh rate, and many gaming monitors reach their top rate on DisplayPort, with HDMI supporting the same only on certain versions. If the manual says the full rate needs a specific HDMI version, a cable from an old console or set-top box may not reach it. Cables labelled for HDMI 2.1 or DisplayPort 1.4 exist for this reason, but labels on unbranded cables are not always reliable, so use the cable that came in the box when in doubt.

Adaptive sync and frame caps

Many monitors support variable refresh rate under names such as G-SYNC Compatible or FreeSync. This feature makes the monitor follow the frame rate of the game within its supported range, which reduces tearing. Enable it in the monitor menu and in the driver software if both offer the option. If you set a fixed refresh rate and the game cannot reach it, the picture will still be fine, though without adaptive sync you may see tearing or choose vertical sync. Some players cap the frame rate a few frames below the refresh rate to stay inside the adaptive range; the exact method depends on the driver and game.

What rate should you choose?

Use Sensible target Reason
Office and video 60 Hz is enough; higher is fine for smoother scrolling Most video content is at lower frame rates
Single-player games with a mid-range GPU The monitor’s native rate with adaptive sync on Frame rate can float without tearing
Competitive shooters The monitor’s top rate More frames shown, lower delay between frames
Older GPU or heavy 4K A rate your system can keep up with A very high rate gives no gain if frames cannot reach it

Common mistakes

  • Buying a high-refresh monitor and never opening the setting. Windows often defaults to 60 Hz on first connection.
  • Changing the rate on the wrong monitor in a multi-screen setup.
  • Using a cable from another device and assuming it carries the full bandwidth.
  • Forcing custom refresh rates beyond what the monitor lists, which can cause a blank screen or flicker and may affect the warranty.
  • Expecting a higher refresh rate to raise the frame rate. It only raises the ceiling; the graphics card still decides the frames.

If you get a black screen

Wait for the revert prompt to time out. If the screen stays black, restart the PC, boot to safe mode if needed, and lower the rate. Connect a second display or try another cable. If the problem returns with the manufacturer’s cable and a current driver, contact the monitor maker’s support.

Frequently Asked Questions

Does a higher refresh rate hurt my monitor?

Running the monitor at a rate its maker lists is within its design. Problems come from forcing custom values beyond the documented range. Stay with the options listed in Windows or the driver.

Why does my 144 Hz monitor show only 60 Hz?

The common causes are a monitor plugged into the motherboard output, a cable or port that cannot carry the rate, or a setting that was never changed from the default. Check the cable, the port, the monitor menu and then the Advanced display page.

Should I use DisplayPort or HDMI?

Use whichever the monitor manual lists for your resolution and refresh rate. Many gaming monitors list the top rate on DisplayPort, but newer HDMI versions can match it on models that support them.

Do I need to turn on G-SYNC or FreeSync too?

It is optional but useful. Enable it in the monitor menu and the graphics driver if your monitor supports it, so the refresh follows the frame rate of the game.

Will a higher refresh rate increase power use?

It can on some displays, especially laptops, which is why Windows offers a dynamic rate option for them. On desktop monitors the difference is usually small.

R
Ryan Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Does a higher refresh rate hurt my monitor?
Running the monitor at a rate its maker lists is within its design. Problems come from forcing custom values beyond the documented range. Stay with the options listed in Windows or the driver.
Why does my 144 Hz monitor show only 60 Hz?
The common causes are a monitor plugged into the motherboard output, a cable or port that cannot carry the rate, or a setting that was never changed from the default. Check the cable, the port, the monitor menu and then the Advanced display page.
Should I use DisplayPort or HDMI?
Use whichever the monitor manual lists for your resolution and refresh rate. Many gaming monitors list the top rate on DisplayPort, but newer HDMI versions can match it on models that support them.
Do I need to turn on G-SYNC or FreeSync too?
It is optional but useful. Enable it in the monitor menu and the graphics driver if your monitor supports it, so the refresh follows the frame rate of the game.
Will a higher refresh rate increase power use?
It can on some displays, especially laptops, which is why Windows offers a dynamic rate option for them. On desktop monitors the difference is usually small.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
How to Set Monitor Refresh Rate (Step-by-Step Guide)Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.