Updated Nov 4, 2026· 19 min read

Our Top Picks

  1. Best premium pick for 1440p 240 Hz or 4K with upscalingASUS Dual GeForce RTX 5060 Ti 16GB GDDR7RTX5060Ti|OC|16GB9 x 4.7 x 2 inches1.4 pounds
    Check on Amazon
    Pros & cons
    • 2.5-slot design balances cooling with broader case compatibility
    • 0dB technology keeps the card silent during light gaming loads
    • Axial-tech fan design is built for improved downward air pressure
    • OC mode clock gains over default mode are relatively modest
    • 2.5-slot sizing still needs adequate case clearance to fit
  2. Best all-round upgrade for 1440p high refreshGIGABYTE GeForce RTX 5070 WINDFORCE OC SFF 12GRTX507011.1 x 4.33 x 1.97 inches
    Check on Amazon
    Pros & cons
    • SFF-ready sizing suits compact builds without sacrificing a full RTX 5070
    • 12GB GDDR7 memory on a 192-bit bus supports modern game textures
    • WINDFORCE cooling system targets efficient heat dissipation in a smaller card
    • 12GB memory trails higher-tier RTX 5070 Ti or 5080 cards
    • Compact SFF design may still need specific case clearance checks
  3. Best value for 1080p and 1440p with 16GB VRAMASRock Radeon RX 9070 Challenger 16GB OC GraphicsRX 9070 16G3 pounds
    Check on Amazon
  4. ASUS SFF-Ready Prime NVIDIA GeForce RTX 5070 Ti
    Check on Amazon

Verdict at a glance

Short answer: play at native resolution with 100% render resolution, medium textures, low shadows, reflections and volumetrics, Reflex On + Boost, frame generation off in multiplayer, and a frame cap a few frames under your refresh rate. Guidance last reviewed October 2026; it applies to Black Ops 6 and to its successor, Call of Duty: Black Ops 7, which share almost the same PC graphics menu.

  • Best all-round upgrade for 1440p high refresh: GIGABYTE GeForce RTX 5070 Windforce OC SFF 12G, a compact card with DLSS 4 and Multi Frame Generation for campaign play.
  • Best value for 1080p and 1440p with 16GB VRAM: ASRock Radeon RX 9060 XT Challenger 16GB OC, already featured below, with FSR 4 support.
  • Best mid-range AMD step-up: ASRock Radeon RX 9070 Challenger 16GB OC, for high textures at 1440p without VRAM worries.
  • Best premium pick for 1440p 240 Hz or 4K with upscaling: ASUS Prime GeForce RTX 5070 Ti 16GB OC Edition.

Best Call of Duty: Black Ops 6 Settings for FPS

The best Call of Duty: Black Ops 6 settings for FPS are a competitive mix of 1080p or 1440p resolution, low-cost shadows and reflections, medium textures matched to your VRAM, NVIDIA Reflex or AMD Anti-Lag where available, and a frame-rate cap your PC can sustain consistently.

Before changing settings: establish a useful baseline

Load a demanding multiplayer map or your usual mode, then record your average FPS and the lowest sustained dips during a fight. Do not judge performance from the first few seconds after launching the game: shader compilation, texture streaming and background processes can create temporary stutter.

Use the in-game performance telemetry if available, or a trusted frame-time overlay. A stable 120 FPS is usually better than fluctuating between 90 and 180 FPS, particularly when using a 120 Hz or 144 Hz monitor. If your GPU usage is close to 95–99%, reduce resolution, render resolution or GPU-heavy quality settings. If GPU usage is low while FPS remains poor, the CPU, memory, background software or game mode may be the limit.

Quick decision matrix

PC or monitor situation Recommended starting point Priority
Older 4-core/6-core CPU and entry-level GPU 1080p, 90–100% render resolution, low settings, medium textures if VRAM allows Stable frame time, not maximum image quality
Mainstream 1080p gaming PC 1080p, 100% render resolution, low/medium mix 144 FPS target where the CPU permits
Modern mid-range 1440p PC 1440p, 90–100% render resolution, medium/high textures, low shadows and reflections 100–165 FPS depending on hardware
High-end GPU with a fast modern CPU 1440p high-refresh or 4K with upscaling, medium/high textures Preserve clarity while controlling frame-time spikes

These are starting points, not guaranteed results. FPS varies substantially with your processor, graphics card, memory, resolution, map, game mode and future patches.

Recommended competitive settings

Use these values when responsiveness and enemy visibility matter more than cinematic detail:

  • Display mode: Fullscreen Exclusive if available; otherwise the lowest-latency fullscreen option.
  • Display resolution: Your monitor’s native resolution. Avoid lowering the desktop resolution unless you have tested the effect on image clarity.
  • Dynamic resolution: Off for a consistent image, or on with a carefully chosen minimum if your PC cannot hold its target FPS.
  • Render resolution: 100% initially. Reduce to 90–95% before lowering native display resolution if you need a small performance increase.
  • V-Sync: Off for the lowest latency, unless tearing is distracting. If using adaptive sync, cap FPS slightly below the monitor’s refresh rate.
  • Custom frame-rate limit: Set it to a value your PC can maintain in heavy fights. For a 144 Hz display, 138–141 FPS is a sensible adaptive-sync target; for a 240 Hz display, use the highest stable value rather than chasing 240 at all times.
  • NVIDIA Reflex: Enabled, or Enabled plus Boost if GPU power use is not a concern. On supported AMD systems, use the game’s latency-reduction option if offered.
  • Texture resolution: Medium on GPUs with around 8 GB of VRAM; High only when VRAM headroom remains and texture streaming does not stutter.
  • Texture filter anisotropic: High or normal. Its FPS cost is usually small, while it improves the clarity of surfaces viewed at an angle.
  • Depth of field, motion blur and weapon motion blur: Off.
  • Film grain: 0.
  • Shadow quality: Low or normal. Shadows can be useful, but high shadow quality is a poor competitive trade-off for most systems.
  • Screen-space reflections: Off or low.
  • Volumetric quality, weather grid volumes and water quality: Low.
  • Particle resolution: Low or normal if explosions cause drops.
  • Bullet impacts and persistent effects: On if you value gameplay feedback; turn them off only if combat effects produce stutter.
  • On-demand texture streaming: Off when bandwidth is limited or when texture downloads cause hitching. If enabled, use a restricted cache and avoid playing during heavy background downloads.

Expected FPS cost and image-quality trade-offs

The table below ranks settings by their typical impact relative to a low-settings baseline. The percentages are broad guidance from common PC performance behavior, not fixed Black Ops 6 benchmark results. Your actual result will vary by patch, CPU, GPU, resolution and scene.

Setting Typical FPS cost when increased What improves Best choice for FPS
Render resolution from 90% to 100% Approximately 8–12% Sharpness and fine detail Use 100% if stable; reduce to 90–95% for a quick gain
Texture resolution Usually 0–5% if VRAM is sufficient; much more with VRAM overflow Surface and weapon detail Medium for 6–8 GB VRAM, high with more headroom
Shadow quality Approximately 3–10% Shadow edge detail and distance Low or normal
Screen-space shadows and reflections Approximately 2–8% each in affected scenes Contact shading and reflective surfaces Low or off
Volumetric quality and weather effects Approximately 3–12% during smoke, fog or weather Atmosphere, fog and light shafts Low
Particle resolution Approximately 2–8% during explosions Effect sharpness Low or normal
Texture filtering Usually under 3% Clarity of distant angled surfaces High; it is an inexpensive visual upgrade
Upscaling or dynamic resolution Can recover approximately 10–35% Lower internal rendering workload Use a quality mode before an aggressive performance mode

Textures are unusual: raising them often has little effect when the GPU has enough VRAM, but insufficient VRAM can cause severe hitching as assets are moved between system memory and graphics memory. A smooth medium-texture preset is preferable to high textures that repeatedly exceed available VRAM.

Best settings for weaker gaming PCs

For a PC struggling to maintain 60 FPS, begin at 1080p with a 90% render resolution and a 60 FPS cap. Use low shadow, reflection, volumetric and particle settings, but keep texture filtering at normal or high. Set textures to low or medium according to VRAM, and disable motion blur, depth of field and film grain.

If performance is still below target, reduce render resolution in five-percent steps: 90%, then 85%, then 80%. This normally preserves a clearer interface and more predictable scaling than immediately switching the monitor to a lower resolution. Use an upscaling option in its quality or balanced mode if Black Ops 6 provides one for your graphics API and GPU.

For an entry-level GPU with limited VRAM, close browsers and launchers, disable unnecessary overlays, and avoid high texture streaming settings. Keep at least 16 GB of system memory available for the game and background tasks; 32 GB provides more breathing room on a modern gaming PC.

Best settings for 1440p and high-refresh systems

At 1440p, the GPU renders roughly 78% more pixels than at 1080p. That means a setting that costs 10% at 1080p can become more noticeable when the graphics card is already saturated. Keep native 1440p for clarity, then lower render resolution to 90–95% if necessary.

Use medium or high textures only after confirming that your GPU has adequate VRAM. Keep shadows, reflections and volumetrics low or normal, because these settings add relatively little competitive information compared with the cost they impose in smoke-filled or visually complex scenes. If your monitor supports adaptive sync, cap FPS a few frames below its maximum refresh rate to reduce latency variation and tearing.

Step-by-step tuning order

  1. Set a target: Choose 60, 120, 144, 165 or another realistic number based on your monitor and CPU.
  2. Fix display and latency options: Select fullscreen, the correct refresh rate, Reflex or the available latency option, and a sensible frame cap.
  3. Adjust resolution scale: Test 100%, then 95% and 90%. Stop when image clarity and frame time are acceptable.
  4. Reduce expensive effects: Lower shadows, reflections, volumetrics and particles in that order while watching the worst dips.
  5. Choose textures last: Raise texture quality until VRAM use approaches its limit, then step back one level if you see hitching.
  6. Test a demanding scenario: Recheck during multiplayer action, not only in a quiet menu or empty section of a map.

Fixes for stutter when average FPS looks high

  • Allow shader compilation to finish after a driver or game update before judging performance.
  • Update the graphics driver only when needed, and restart the game after changing major graphics options.
  • Check VRAM usage and lower textures or streaming quality if the graph repeatedly reaches the limit.
  • Use a frame cap to prevent the GPU from constantly running at its maximum power limit.
  • Disable recording, browser hardware acceleration and overlays one at a time to identify conflicts.
  • If the GPU is underused, inspect CPU utilization, temperatures, memory speed and background applications rather than lowering every graphics setting.

Black Ops 6 vs Black Ops 7: what changed in the settings menu

Black Ops 7 launched on November 14, 2025 and runs on the same engine family as Black Ops 6, so nearly every recommendation in this guide carries straight over. The menu is still split into Display, Quality and View tabs, the latency options sit in the same place, and the costly settings are the same group: shadows, screen-space reflections, volumetrics, particles and, in Black Ops 7, ray-traced reflections. If you already have a well-tuned Black Ops 6 profile, start Black Ops 7 from the same values and only revisit textures and upscaling.

The differences that matter for FPS are:

  • Higher storage and VRAM appetite. Black Ops 7 asked for 116 GB of SSD space at launch, and installs have grown with later patches; and it is noticeably harder on 8GB graphics cards at high textures, especially when frame generation is also enabled. Running either game from a hard drive causes streaming stutter that no graphics setting will fix.
  • Ray-traced reflections. Black Ops 7 offers ray-traced reflections in multiplayer and Zombies. Independent coverage from PCOptimizedSettings and OC3D shows a very large FPS cost, so leave it off for competitive play.
  • Newer upscalers. The game supports DLSS 4 (including the transformer model and Multi Frame Generation on RTX 50 cards), FSR 4 on Radeon RX 9000 cards, FSR 3 for older GPUs, and XeSS 2 on Intel Arc. It was also the first game to add AMD’s FSR “Redstone” Ray Regeneration denoiser, which is exclusive to RX 9000 series cards and only matters if you enable ray-traced reflections.
  • VRAM Scale Target. Both games expose a VRAM budget slider that defaults to around 80–90%. Lowering it to 60–70% leaves headroom for Discord, browsers and the operating system and reduces texture-swap hitching on 8GB cards.

Official PC requirements for Black Ops 7 list a Ryzen 5 1400 or Core i5-6600 with a GTX 970/1060, RX 470 or Arc A580 and 8 GB of RAM as the minimum, and a Ryzen 5 1600X or Core i7-6700K with an RTX 3060, RX 6600 XT or Arc B580 and 12 GB of RAM as the recommended spec. Those targets are for playable frame rates, not for holding 144 FPS in a busy lobby; for that, a six-core or better CPU from the last few generations and a GPU at the RTX 5060 or RX 9060 XT level are more realistic.

Upscaling and frame generation: which option to use

Upscaling is now the single largest FPS lever in both games, and the right choice depends on your GPU brand and generation. Frame generation is a separate switch and should be treated differently from upscaling.

Your GPU Best upscaler Starting mode Frame generation
GeForce RTX 50 series DLSS 4 (transformer model) Quality at 1440p, Balanced at 4K Off in multiplayer; Multi Frame Generation is fine in the campaign
GeForce RTX 20/30/40 series DLSS (transformer or CNN model) Quality; try the CNN model if you need a few extra frames Off in multiplayer; RTX 40 frame generation only for single-player
Radeon RX 9000 series FSR 4 Quality Off in multiplayer; FSR frame generation for campaign or Zombies
Older Radeon, GTX cards FSR 3 or render resolution 85–95% Quality or Balanced; add FidelityFX CAS sharpening around 50–75 Off; older cards rarely have the VRAM headroom
Intel Arc XeSS 2 Quality Off in multiplayer

Why frame generation stays off for ranked play: generated frames raise the FPS counter but do not respond to your mouse input, and the technique holds back a rendered frame to interpolate between two, which adds latency. Several settings guides put the added delay of multi-frame generation in the 20–30 ms range. In a fast multiplayer gunfight, a lower real frame rate with Reflex on feels more responsive than a higher generated one. In the campaign, on the other hand, frame generation can make a 70 FPS experience look far smoother without a real downside, provided you leave at least 1.5 GB of free VRAM, as PCOptimizedSettings advises.

If your PC already holds your target at native resolution, use FidelityFX CAS at native for extra sharpness instead of an upscaler. If you dislike the softness some upscalers produce, a 90–95% render resolution is a clean, artifact-free alternative that recovers a smaller but useful amount of performance.

Preset tables by GPU tier

The tables below translate the guidance above into starting presets for three hardware tiers. They are based on the official requirements, independent settings analyses and owner reports, not on our own benchmark runs. They assume a capable six-core or better CPU, 16 GB or more of dual-channel RAM, and the game installed on an SSD.

Low tier: GTX 1660, RX 580/6600, RTX 3050 at 1080p

Setting Value
Resolution / render resolution 1080p / 85–90%, or upscaler Balanced
Upscaler DLSS (RTX) or FSR 3 (others), Balanced or Performance
Frame generation Off
VRAM Scale Target 60%
Textures Low or Normal
Shadows / screen-space shadows Low / Off
Reflections, volumetrics, particles, water Off or Low
Texture filtering Normal
Ray tracing Off
Frame cap 60–75 FPS, stable

Mid tier: RTX 3060/4060/5060, RX 6600 XT/7600/9060 XT at 1080p–1440p

Setting Value
Resolution / render resolution Native / 100%
Upscaler DLSS or FSR 4 Quality at 1440p; native at 1080p if FPS allows
Frame generation Off in multiplayer
VRAM Scale Target 70% (60% on 8GB cards)
Textures Normal on 8GB, High on 12–16GB
Shadows / screen-space shadows Normal / Low
Reflections, volumetrics, particles Low
Texture filtering High
Ray tracing Off
Frame cap 3 below refresh (for example 141 on 144 Hz)

High tier: RTX 4070 and up, RTX 5070/5070 Ti, RX 7800 XT/9070/9070 XT at 1440p–4K

Setting Value
Resolution / render resolution 1440p native or 4K with upscaling
Upscaler DLSS 4 or FSR 4 Quality (4K: Balanced)
Frame generation Off in multiplayer, optional in campaign
VRAM Scale Target 70–80%
Textures High
Shadows / screen-space shadows Normal or High / Normal
Reflections Low (ray-traced reflections off for competitive play)
Volumetrics, particles Low or Normal
Texture filtering High
Frame cap 3 below refresh on 165–240 Hz monitors

On Intel 12th to 14th gen hybrid CPUs, some players report steadier frame times after setting the game’s renderer worker count to match the number of performance cores in the config file. Treat that as an optional tweak: back up the file first, and revert it if a patch resets or changes the setting.

Final recommended preset

For most competitive players, use native resolution, 100% render resolution, medium textures, high texture filtering, low shadows, low reflections, low volumetrics, low particles, disabled blur and depth of field, and a stable FPS cap. On weaker PCs, move render resolution to 90%, use low effects and medium textures only when VRAM permits. This combination usually removes the settings with the highest frame-time cost while preserving the sharpness needed to see opponents.

When Settings Aren’t Enough: Upgrade Options

If the lowest sensible settings still can’t hold a steady frame rate in Call of Duty: Black Ops 6, a newer graphics card is the upgrade that changes the most. These cards cover the usual budget-to-midrange steps.

ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC Edition Gaming Graphics Card | PCIe 5.0, HDMI 2.1b, DisplayPort 2.1b, 2.5-slot, Axial-tech Fans, 0dB Technology, Dual BIOS

ASUS Dual GeForce RTX 5060 Ti 16GB GDDR7 OC Edition Gaming Graphics Card | PCIe 5.0, HDMI 2.1b, DisplayPort 2.1b, 2.5-slot, Axial-tech Fans, 0dB Technology, Dual BIOS

One of the consumer electronics options compared in this guide.

View on Amazon

GIGABYTE GeForce RTX 5070 Windforce OC SFF 12G

GIGABYTE GeForce RTX 5070 WINDFORCE OC SFF 12G Graphics Card, 12GB 192-bit GDDR7, PCIe 5.0, WINDFORCE Cooling System, GV-N5070WF3OC-12GD Video Card

GIGABYTE GeForce RTX 5070 WINDFORCE OC SFF 12G Graphics Card, 12GB 192-bit GDDR7, PCIe 5.0, WINDFORCE Cooling System, GV-N5070WF3OC-12GD Video Card

Chosen because it adds cooling or gel-infused layers.

View on Amazon

The RTX 5070 is the most sensible step above the 5060 Ti class if your goal is a locked 144 to 165 FPS at 1440p in Black Ops 6 or Black Ops 7 multiplayer. It uses NVIDIA’s Blackwell architecture with 6,144 CUDA cores, 12GB of GDDR7 on a 192-bit bus and a rated total board power of around 250W. In practice that means you can keep textures at High, run DLSS 4 in Quality mode at 1440p and still have frame-rate headroom in smoke-heavy fights, where weaker cards drop the most.

GIGABYTE’s Windforce OC SFF version is designed to meet NVIDIA’s small-form-factor-ready guidelines, so it fits in compact cases where triple-slot flagship coolers will not. It uses a triple-fan Windforce cooler with a factory overclock, PCIe 5.0, and the usual DisplayPort 2.1b and HDMI 2.1b outputs, so it can drive 240 Hz 1440p or high-refresh 4K panels.

Who it’s for: players on a 1440p 144–240 Hz monitor who want high textures and DLSS 4 without moving to a premium card. It also gives you Multi Frame Generation for the campaign, where latency matters less.

Strengths: strong 1440p performance for the money, DLSS 4 transformer upscaling with excellent image quality, Reflex support, compact SFF-ready dimensions, and reasonable power draw that most quality 650–750W power supplies can handle.

Drawbacks: 12GB of VRAM is enough for these games at 1440p today but leaves less margin than the 16GB cards in this guide, especially if you push textures and frame generation together. A compact cooler can also run louder under sustained load than larger premium designs.

How it compares: it sits clearly above the RTX 5060 Ti 16GB and RX 9060 XT featured above in raw frame rate, while the RX 9070 below offers more VRAM and similar raster speed. If you play mostly with DLSS and value NVIDIA Reflex, the 5070 is the stronger mid-range choice; if you want maximum texture headroom, look at the Radeon.

ASRock Radeon RX 9070 Challenger 16GB OC

ASRock Radeon RX 9070 Challenger 16GB OC Graphics Card, RDNA 4, 2520MHz Boost, 16GB GDDR6 256-bit, PCIe 5.0, Triple Fans, 0dB Silent, LED Indicator

ASRock Radeon RX 9070 Challenger 16GB OC Graphics Card, RDNA 4, 2520MHz Boost, 16GB GDDR6 256-bit, PCIe 5.0, Triple Fans, 0dB Silent, LED Indicator

One of the consumer electronics options compared in this guide.

View on Amazon

The Radeon RX 9070 is AMD’s mid-range RDNA 4 card with 56 compute units, 16GB of GDDR6 on a 256-bit bus and a typical board power of around 220W. It is the AMD card to choose if you want the full 1440p high-texture experience in Call of Duty with a VRAM buffer that will not be the limiting factor any time soon. It also unlocks FSR 4, AMD’s machine-learning upscaler that is restricted to RX 9000 series cards and gives clearly better image quality than FSR 3.

ASRock’s Challenger OC is a no-frills triple-fan design with a factory boost clock of 2,520 MHz, a 0dB silent mode at idle, and PCIe 5.0 support. It avoids flashy RGB and focuses on cooling and value, which suits a performance-first Call of Duty build.

Who it’s for: 1440p players who want to set textures to High, keep the VRAM Scale Target generous, and use FSR 4 Quality for extra frames. Also a strong fit for AMD Ryzen systems where Smart Access Memory is easy to enable.

Strengths: 16GB of VRAM, efficient power draw, FSR 4 and Anti-Lag 2 support, quiet idle behavior, and strong raster performance in Call of Duty, which has traditionally run well on Radeon hardware.

Drawbacks: ray-traced reflections are still more expensive on Radeon than on GeForce, though you should keep them off for competitive play anyway. The Challenger cooler is functional rather than premium, and the card is long enough to check case clearance first.

How it compares: versus the RTX 5070 it trades DLSS for more memory; versus the RX 9060 XT featured above it offers a large jump in 1440p frame rate. If you are deciding between this and the RX 9070 XT, the XT adds more compute units and higher clocks for 1440p 240 Hz, at a higher price tier.

ASUS Prime GeForce RTX 5070 Ti 16GB OC Edition

ASUS SFF-Ready Prime NVIDIA GeForce RTX 5070 Ti 16GB GDDR7 OC Edition 16GB GDDR7 Graphics Card (PCIe 5.0, HDMI/DP 2.1, 2.5-Slot, Axial-tech Fans, Dual BIOS), 3 Year Warranty

ASUS SFF-Ready Prime NVIDIA GeForce RTX 5070 Ti 16GB GDDR7 OC Edition 16GB GDDR7 Graphics Card (PCIe 5.0, HDMI/DP 2.1, 2.5-Slot, Axial-tech Fans, Dual BIOS), 3 Year Warranty

One of the consumer electronics options compared in this guide.

View on Amazon

For players who want to stay well above 200 FPS at 1440p or run 4K with DLSS Quality in Black Ops 6 and Black Ops 7, the RTX 5070 Ti is the point where the settings stop being a compromise. It has 8,960 CUDA cores, 16GB of GDDR7 on a 256-bit bus and a rated total board power of around 300W. The 16GB buffer means High textures, a generous VRAM Scale Target and even campaign frame generation can all run at once.

The ASUS Prime OC Edition is SFF-ready at 2.5 slots, uses three axial-tech fans, and keeps the styling understated. It offers PCIe 5.0 and DisplayPort 2.1b for high-refresh 1440p and 4K monitors, and like all RTX 50 cards it supports DLSS 4 with Multi Frame Generation and Reflex.

Who it’s for: competitive players with 240 Hz or faster 1440p monitors, and anyone gaming at 4K who wants consistent frame times without dropping to low settings.

Strengths: large performance margin, 16GB VRAM, excellent DLSS 4 image quality, relatively compact for its class, and strong headroom for future Call of Duty releases on the same engine.

Drawbacks: it sits in the premium tier and needs a quality 750W or larger power supply with a 12V-2×6 connector. At 1080p, a fast CPU becomes the limit long before this card does, so it is overkill for a 1080p 144 Hz setup.

How it compares: roughly a tier above the RTX 5070 and RX 9070 here, and the clear pick if your CPU is a modern X3D or high-end Intel chip that can feed it. Pair it with the settings from the high-tier table above.

Upgrade picks compared

Card VRAM Upscaling Best resolution in Call of Duty Price tier
GIGABYTE RTX 5070 Windforce OC SFF 12GB GDDR7 DLSS 4, Multi Frame Generation 1440p 144–240 Hz Mid-range
ASRock RX 9070 Challenger OC 16GB GDDR6 FSR 4 1440p high textures Mid-range
ASUS Prime RTX 5070 Ti OC 16GB GDDR7 DLSS 4, Multi Frame Generation 1440p 240 Hz, 4K with upscaling Premium

How we compared

This guide is based on the Black Ops 6 and Black Ops 7 PC settings menus, the official system requirements published by Activision, and independent performance analyses from publications such as PCOptimizedSettings, Guru3D, OC3D and PCGamesN, plus patterns reported by PC players. We did not run our own benchmarks. FPS cost estimates are broad ranges, and the GPU recommendations are based on published specifications and third-party data. Settings were last reviewed in October 2026; seasonal patches can rename options or change their cost, so re-check after major updates.

Frequently asked questions

Do Black Ops 6 settings work in Black Ops 7?

Mostly, yes. The two games share the same engine family and an almost identical graphics menu. Start Black Ops 7 from your Black Ops 6 values, then re-check textures, the VRAM Scale Target and the upscaler, because Black Ops 7 is heavier on VRAM and adds ray-traced reflections, which you should leave off for multiplayer.

Should I use DLSS or FSR in Black Ops 6 and Black Ops 7?

Use DLSS on GeForce RTX cards, FSR 4 on Radeon RX 9000 cards, FSR 3 on older AMD and GTX cards, and XeSS on Intel Arc. Quality mode is the best starting point at 1440p; Balanced is usually fine at 4K. If you already hit your FPS target natively, use CAS sharpening at native instead.

Is frame generation good for Call of Duty multiplayer?

Not for competitive play. Frame generation raises the displayed frame rate but adds input latency, because it holds back frames to create the generated ones. Keep it off in multiplayer and ranked, and only consider it in the campaign or casual Zombies sessions.

What is the best FPS cap for Black Ops?

With G-Sync or FreeSync, cap three or so frames below your refresh rate, such as 141 on a 144 Hz monitor or 237 on a 240 Hz monitor. Without adaptive sync, cap at the highest value your PC can hold during heavy fights, so frame times stay consistent.

Why does Black Ops stutter even with high FPS?

The usual causes are shader compilation after a driver or game update, VRAM overflow from textures that are too high, on-demand texture streaming downloads, and installing the game on a hard drive. Let shaders finish, lower the VRAM Scale Target to 60–70%, reduce textures one step and move the game to an SSD.

How much VRAM do I need for Black Ops 7?

8GB runs the game well at Normal textures at 1080p. 12GB is comfortable for High textures at 1440p, and 16GB gives room for High textures, frame generation in the campaign and future updates without hitching.

R
Ryan Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Do Black Ops 6 settings work in Black Ops 7?
Mostly, yes. The two games share the same engine family and an almost identical graphics menu. Start Black Ops 7 from your Black Ops 6 values, then re-check textures, the VRAM Scale Target and the upscaler, because Black Ops 7 is heavier on VRAM and adds ray-traced reflections, which you should leave off for multiplayer.
Should I use DLSS or FSR in Black Ops 6 and Black Ops 7?
Use DLSS on GeForce RTX cards, FSR 4 on Radeon RX 9000 cards, FSR 3 on older AMD and GTX cards, and XeSS on Intel Arc. Quality mode is the best starting point at 1440p; Balanced is usually fine at 4K. If you already hit your FPS target natively, use CAS sharpening at native instead.
Is frame generation good for Call of Duty multiplayer?
Not for competitive play. Frame generation raises the displayed frame rate but adds input latency, because it holds back frames to create the generated ones. Keep it off in multiplayer and ranked, and only consider it in the campaign or casual Zombies sessions.
What is the best FPS cap for Black Ops?
With G-Sync or FreeSync, cap three or so frames below your refresh rate, such as 141 on a 144 Hz monitor or 237 on a 240 Hz monitor. Without adaptive sync, cap at the highest value your PC can hold during heavy fights, so frame times stay consistent.
Why does Black Ops stutter even with high FPS?
The usual causes are shader compilation after a driver or game update, VRAM overflow from textures that are too high, on-demand texture streaming downloads, and installing the game on a hard drive. Let shaders finish, lower the VRAM Scale Target to 60–70%, reduce textures one step and move the game to an SSD.
How much VRAM do I need for Black Ops 7?
8GB runs the game well at Normal textures at 1080p. 12GB is comfortable for High textures at 1440p, and 16GB gives room for High textures, frame generation in the campaign and future updates without hitching.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Call of Duty: Black Ops 6 Settings…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.