Updated Nov 16, 2026· 5 min read

Key takeaways

  • Powering off the moment the percentage stops moving.
  • Deleting the wrong folder while attempting a cache clear.
  • Ignoring low disk space.
  • Leaving docks, external drives and capture devices attached.
  • Using third-party “update fixer” downloads from unknown sites.
  • Skipping a backup before a feature update.

If Windows Update is stuck, wait long enough for it to finish, then restart the PC, run the built-in Windows Update troubleshooter, and clear the update cache. Microsoft’s support guidance for failing updates centres on exactly these steps, plus checking internet, power, free disk space and removing external hardware.

How Long Is Too Long?

Large feature updates can legitimately sit at one percentage for a long time, particularly on a hard drive rather than an SSD, because Windows is doing work that does not move the counter. A common rule of thumb in support articles is to allow a couple of hours with disk activity before concluding that it has hung. Signs of a real hang are no drive light activity, no change in the spinning dots, and no fan or CPU activity change for a long time. Do not cut power during the “Working on updates” or “Do not turn off your computer” screens unless you are sure it has frozen, since interrupting can cause corruption.

Where It Is Stuck Matters

Where it sticks What is happening What to try
0 percent while downloading Network, service or cache problem Check connection, run troubleshooter, clear cache
Stuck between 1 and 99 percent downloading Interrupted download or low disk space Restart, free up disk space, retry
100 percent downloaded, will not install Installer waiting on a restart or a service Restart, then re-check updates
“Working on updates” at boot Update being applied on restart Allow extra time, then see recovery steps
Update loops back after restart Failed install and rollback Reset cache, update drivers, check update error code
Pending restart for days Update waiting on restart Restart manually, close apps that block it

Step 1: Basic Checks

  1. Confirm a stable internet connection, and plug in laptops.
  2. Free up disk space. Microsoft’s support page states that at least 20 GB is needed for a 64-bit update, so make room on the system drive.
  3. Unplug external drives, extra USB devices and docks.
  4. Make sure the date, time and time zone are correct, since wrong values can break update checks.
  5. Restart the computer and try again.

Step 2: Run the Troubleshooter

According to Microsoft’s support page, go to Start, Settings, System, Troubleshoot, Other troubleshooters, and run the Windows Update troubleshooter. It can reset components and report anything it finds. Wait for it to finish, restart and check for updates again.

Step 3: Clear the Update Cache

Microsoft’s guidance lists clearing the contents of the SoftwareDistribution folder as one of the steps when updates fail. This folder holds downloaded update files; deleting its contents forces Windows to fetch them again.

  1. Open an elevated Command Prompt (run as administrator).
  2. Stop the Windows Update service and the Background Intelligent Transfer Service using the net stop command for each.
  3. Open the SoftwareDistribution folder inside the Windows folder and delete its contents, not the folder itself.
  4. Start the services again with the net start command, or restart the PC.
  5. Check for updates.

Only delete files in that folder. Deleting other system folders can damage Windows. Some guides also suggest renaming the Catroot2 folder; this is a more advanced step, so read Microsoft’s instructions carefully before trying it.

Step 4: Update Drivers and Firmware

Microsoft’s guidance includes updating third-party drivers as part of the troubleshooting list. A very old storage, network or chipset driver can stall an update. Download them from the maker or the motherboard or laptop support page for your model. A BIOS update is a larger step, and the maker’s instructions must be followed exactly, including keeping the PC on power throughout.

Step 5: Repair System Files

From an elevated prompt, the DISM tool and the System File Checker are the standard repair utilities. Commonly cited order is DISM with the restore health option, followed by sfc with the scannow option. They may take a while and appear to pause; let them finish. Restart afterward and try the update again.

Step 6: If It Is Stuck at Boot

If the PC is frozen on the update screen with no disk activity for a very long time, hold the power button to force off, then turn it back on. Windows will often roll back the failed update by itself. If it loops, use the recovery environment: Troubleshoot, Advanced options, then Startup Repair, Uninstall Updates or System Restore. Microsoft’s startup options documentation notes that a BitLocker recovery key may be required if the drive is encrypted, so have it ready.

Step 7: Install Manually

If a specific update keeps failing, note its KB number from Update history, then find the standalone package in Microsoft’s Update Catalog and install it manually. For a feature update, Microsoft’s installation assistant or a media creation tool is an alternative path, with the option to keep personal files. Back up important data first.

Quick Decision Table

Situation Best next move
Update just started and is slow Wait, keep the PC on power
Stuck for hours with no drive activity Force restart, run troubleshooter
Fails repeatedly with the same error code Search the code on Microsoft’s support site and clear the cache
Low disk space Free space on the system drive, then retry
PC will not boot after the update Recovery environment, uninstall update
Nothing works Repair install or clean install with a backup

Common Mistakes

  • Powering off the moment the percentage stops moving.
  • Deleting the wrong folder while attempting a cache clear.
  • Ignoring low disk space.
  • Leaving docks, external drives and capture devices attached.
  • Using third-party “update fixer” downloads from unknown sites.
  • Skipping a backup before a feature update.

When to Contact Support

If the same update fails after every step above, the drive may have errors or the system image may be damaged. Run the drive maker’s diagnostic tool and contact Microsoft support or the PC maker. For laptops and prebuilt desktops under warranty, the maker’s support is the safest route.

Frequently Asked Questions

Is it safe to turn off the PC if Windows Update is stuck?

It is a last resort. Wait first, since big updates can sit for a long time without visible progress. If there has been no disk activity for a long stretch, a forced restart is usually survived, though a failed update may roll back.

How much free space does Windows Update need?

Microsoft’s support page cites at least 20 GB for 64-bit Windows when troubleshooting updates. More free space is better for feature updates, which unpack large files.

Will clearing SoftwareDistribution delete my files?

No, it holds temporary update downloads, not personal files. Windows rebuilds it the next time it checks for updates. Update history may reset, and the next check can take longer.

Why does the update restart and revert to the old version?

Windows rolls back when an install fails partway. A driver conflict, low disk space or corrupted files are common causes, so work through the troubleshooter, cache clear, driver updates and repair tools.

Can I skip a stuck update?

You can pause updates for a while, but skipping security updates long term leaves holes. Try fixing the cause or installing the update manually instead.

R
Ryan Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

How Long Is Too Long?
Large feature updates can legitimately sit at one percentage for a long time, particularly on a hard drive rather than an SSD, because Windows is doing work that does not move the counter. A common rule of thumb in support articles is to allow a couple of hours with disk activity before concluding that it has hung. Signs of a real hang are no drive light activity, no change in the spinning dots, and no fan or CPU activity change for a long time. Do not cut power during the “Working on updates” or “Do not turn off your computer” screens unless you are sure it has frozen, since interrupting can cause corruption.
Is it safe to turn off the PC if Windows Update is stuck?
It is a last resort. Wait first, since big updates can sit for a long time without visible progress. If there has been no disk activity for a long stretch, a forced restart is usually survived, though a failed update may roll back.
How much free space does Windows Update need?
Microsoft’s support page cites at least 20 GB for 64-bit Windows when troubleshooting updates. More free space is better for feature updates, which unpack large files.
Will clearing SoftwareDistribution delete my files?
No, it holds temporary update downloads, not personal files. Windows rebuilds it the next time it checks for updates. Update history may reset, and the next check can take longer.
Why does the update restart and revert to the old version?
Windows rolls back when an install fails partway. A driver conflict, low disk space or corrupted files are common causes, so work through the troubleshooter, cache clear, driver updates and repair tools.
Can I skip a stuck update?
You can pause updates for a while, but skipping security updates long term leaves holes. Try fixing the cause or installing the update manually instead.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.